RifidiWiki - User contributions [en]

Designer User's Guide

2008-01-12T12:46:23Z

Brian: /* Properties */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the Pause button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
There are two ways to Turn Off components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on Turn Off
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn Off
#This will Turn Off all the components assigned to the group

The client should now disconnect from the virtual reader as if the device has been powered off

==Properties==
===Edit Conveyor Speed===
==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group (Example: groups1) to expand the assigned grouped component list if not expanded already.
#Click on the conveyor component.
#At the bottom below the Layout Designer view you will now see the conveyor component's property view.
#Click on the speed property and change the value.
#The next time you Turn On the components (if not on already) and play the simulation you will see the new speed.

===Edit Box Producer Rate===
#Click on the Layout Navigator tab.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group (Example: groups1) to expand the assigned grouped component list if not expanded already.
#Click on the box producer component.
#At the bottom below the Layout Designer view you will now see the box producer component's property view.
#Click on the rate property and change the value.
#The next time you Turn On the components (if not on already) and play the simulation you will see the new rate.

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:39:37Z

Brian: /* Turn Off Components */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the Pause button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
There are two ways to Turn Off components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on Turn Off
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn Off
#This will Turn Off all the components assigned to the group

The client should now disconnect from the virtual reader as if the device has been powered off

==Properties==
===Edit Conveyor Speed===
===Edit Box Producer Rate===

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:39:02Z

Brian: /* Edit Simulation Layout */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the Pause button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
There are two ways to Turn Off components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on Turn Off
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn Off
#This will Turn Off all the components assigned to the group

The client should now disconnect from the virtual reader as if the device has been powered off

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:38:45Z

Brian: /* Turn Off Components */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the Pause button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
There are two ways to Turn Off components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on Turn Off
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn Off
#This will Turn Off all the components assigned to the group

The client should now disconnect from the virtual reader as if the device has been powered off

==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:36:43Z

Brian: /* Pause Simulation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the Pause button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:36:28Z

Brian: /* Reset Simulation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
#On the Designer Toolbar, you can now click on the reset button to start the simultaion
#Once you reset the simultaion you should now see boxes being produced, the conveyor and push arm moving be reset
#The client connected to the virtual reader will continue to be connected.

==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:35:35Z

Brian: /* Pause Simulation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you pause the simultaion you should now see boxes being produced and the conveyor and push arm moving pause, left in the previous state.
#The client connected to the virtual reader will continue to be connected.

==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:33:08Z

Brian: /* Properties */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:32:50Z

Brian: /* Simulation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:32:25Z

Brian: /* Viewing */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:32:01Z

Brian: /* Adding to Layout */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==

==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:31:20Z

Brian: /* Navigation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==

===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==
==Adding to Layout==
==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:30:25Z

Brian: /* Start Simulation */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
#On the Designer Toolbar, you can now click on the play button to start the simultaion
#Once you start the simultaion you should now see boxes being produced and the conveyor and push arm moving at their defined rates.
#The client connected to the virtual reader should now report tags as the boxes pass through the gate's aetenna.

==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==
===Navigation===
====Move Individual Components====
====Rotate Individual Components====
====Move Group of Components====
===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==
==Adding to Layout==
==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:26:39Z

Brian: /* Add Components to Group */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group. (Example: group1) Now you can move the components around in a group in the Layout Designer instead of having to move each component seperately. There are other benefits of groups which will be described in later sections.

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==
===Navigation===
====Move Individual Components====
====Rotate Individual Components====
====Move Group of Components====
===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==
==Adding to Layout==
==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:24:02Z

Brian: /* Turn On Components */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group (Example: group1)

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==
===Navigation===
====Move Individual Components====
====Rotate Individual Components====
====Move Group of Components====
===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==
==Adding to Layout==
==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:23:51Z

Brian: /* Turn On Components */

[[category:userDoc]]

=Requirements=
*Microsoft Windows 2000/XP/2003 or Linux (Ubuntu, Red Hat, SuSe)
*Sun Java Runtime Environment 1.5 (J2SE 5.0)

=Installation=
Designer is completely written in Java so installation is very easy. Additionally, Designer is packaged in a standard installer.

# Download the latest version of Rifidi Emulator from http://sourceforge.net/projects/rifidi/
# Double click to run the install. Follow the on screen instructions.

=Launching Rifidi Designer=

*Windows Users: Simply click the shortcut located in the Rifidi folder in the Start Menu/Programs folder.
*Linux Users: Double click the executable file located in the installation directory.

=Getting Started - Example Designer Simulation=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerNewLayoutWizard.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Add a Conveyor==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.[[Image:DesignerComponentView.png |none|thumb|800px|The Rifidi Designer UI]]
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list. [[Image:DesignerComponentViewExpanded.png |none|thumb|800px|The Rifidi Designer UI]]
#Highlight the 'Conveyor' component and drag and drop to the 'Layout Designer'
#Enter a name for the component and the feet per second. (Example 1 ft/sec) [[Image:DesignerConveyorWizard.png |none|thumb|800px|The Rifidi Designer UI]]
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Push Arm==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Push Arm' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, the seconds per push and click 'Finish'. (Example: 1 sec/push)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Gate==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Gate' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, select a reader type and click 'Next'.
#Enter a name for the reader and click 'Finish'.
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Add a Box Producer==
#Click on the 'Components' Tab to view the library of all available components to add to a layout.
#If the list is not expanded already, Click on the '+' next to RFID Base Models to expand the list.
#Highlight the 'Producer' component and drag and drop to the 'Layout Designer'
#Enter a name for the component, seconds per box and click 'Finish'. (Example: 5 sec/box)
#You will now see the component displayed in the 'Layout Designer'. ''Note: For placement refer to the Component Placement Section''

==Component Placement==
===Conveyor Placement===
#In the Layout Designer View, click on the conveyor. ''Note: Yellow arrows will show the direction of the conveyor''
#Move the conveyor to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Release the left mouse button once the desired location has been reached.
#If placement is valid the component will move to the new location and if placement is invalid the component will move to the prior valid location

===Box Producer Placement===
#In the Layout Designer View, click on the Box Producer.
#Move the producer to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the producer is over the end of the conveyor, release the left mouse button to finish placement.

===Push Arm Placement===
#In the Layout Designer View, click on the Push Arm.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted.''
#Once the push arm is next to the right end of the conveyor, release the left mouse button.
#To finalize the placement, verify the push arm is pointed in the direction to push over the conveyor (Look for shaded area to be over conveyor). If not then you can rotate the component by 90 degrees by clicking on the component and then clicking on the rotate 90 degrees button in the toolbar. ''Note: Click twice to turn the component in the opposite direction.
''

===Gate Placement===
#In the Layout Designer View, click on the Gate.
#Verify the space between the gate's legs can fit over the conveyor based on the conveyor's placement. If not then click on the gate and rotate 90 degrees by clicking on the 90 degree rotate button in the toolbar.
#Move the gate to the desired location by holding the left mouse button down. ''Note: The area below the component will be highlighted in green when placement is valid and red when placement is invalid.''
#Once the gate is over the center of the conveyor, release the left mouse button.

==Assign a Data Producer to a Producer component==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Data Producer to expand the data producer list if not expanded already.
#In the Data Producer list click on the desired tag data to be associated with the box producer. (Example: DOD tags)
#Hold the left mouse button down on the desired data producer and drag and drop onto the Box Producer located in the ungrouped components list.
#You have now associated a Data Producer to the Box Producer which is a necessary step for the simulation to generate the desired tag data format.

==Create a Group==
#Click on the Layout Navigator tab.
#Right click on Grouped Components
#In the right click menu, click on create group
#In the create group wizard, enter in a group name (example: group1)
#You will now see the new group listed under Grouped Components

==Add Components to Group==
#Click on the Layout Navigator tab.
#Click on the '+' next to Ungrouped Components to expand the ungrouped components list if not expanded already.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#In the Ungrouped Components list, click on the conveyor component (Example: conveyor1).
#Hold the left mouse button down on the conveyor component and drag and drop into the Group (Example: group1)
#Repeat steps 2 - 4 for each or the remaining ungrouped components
#Once all the steps have been completed, you will now have all the components assigned to a group (Example: group1)

==Turn On Components==
There are two ways to turn on components:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on the conveyor component
#In the conveyor component right click menu, click on turn On
#Repeat steps 3-4 for each component in the group

or the short cut is to:

#Click on the Layout Navigator tab if not already selected.
#Click on the '+' next to Grouped Components to expand the grouped list if not expanded already.
#Click on the '+' next to the group name (Example: group1) to expand the group if not expanded already.
#Right click on group (Example: group1)
#In the group right click menu, click on Turn On
#This will Turn On all the components assigned to tha group

You can now connect to the virtual reader (Alien, AWID, Symbol, LLRP) you created with a client such as telnet, client library, middleware or EdgeServer.

==Start Simulation==
==Pause Simulation==
==Reset Simulation==
==Turn Off Components==
==Edit Simulation Layout==
===Navigation===
====Move Individual Components====
====Rotate Individual Components====
====Move Group of Components====
===Properties===
====Edit Conveyor Speed====
====Edit Box Producer Rate====

=Layouts=
==Create Layout==
#Once the program is loaded, the main UI will be present. [[Image:DesignerHome.PNG |none|thumb|800px|The Rifidi Designer GUI]]
#To create a new layout, click the 'file' and 'new layout'.
#Enter in a layout name, select size of the room (64x64 or 256x256 square feet) and click 'Finish'.[[Image:DesignerCreateLayout.png |none|thumb|400px|Create New Layout]]
#A new empty layout will be displayed in the UI ready for use [[Image:DesignerNewLayout.png |none|thumb|800px|New Layout]]

==Open Layout==
# Once the program is loaded, the main UI will be present. [[Image:DesignerHome.png |none|thumb|800px|The Rifidi Designer UI]]

=Components=
==Viewing==
==Adding to Layout==
==Turn on Components==
==Turn off Components==
==Rename Components==
==Delete Components==

=Placement=
==Moving Components==
==Rotating 90 Degrees==

=Layout Navigation=
==UnGrouped Components==
==Grouped Components==
===Create Group===
===Add Components===
===Rename Group===
===Delete Group===

==Generated Components==
==Data Producers==

=Simulation=
==Play==
==Pause==
==Reset==

=MiniMap=
==Navigation==
==Zoom in/Zoom out==

=Camera=
==Camera Views==
==Zoom in/Zoom out==

=Properties=

=Quickstart Video=
A video of these installation steps can be seen here: http://www.rifidi.org/rifidipackage/rif_out.html

Designer User's Guide

2008-01-12T12:14:45Z

Brian: /* Add Components to Group */

Designer User's Guide

2008-01-12T12:08:25Z

Brian: /* Create a Group */

Designer User's Guide

2007-12-23T01:34:20Z

Brian: /* Create Layout */

Designer User's Guide

2007-12-22T15:28:50Z

Brian: /* Assign a Data Producer to a Producer component */

Designer User's Guide

2007-12-22T15:21:06Z

Brian: /* Gate Placement */

Designer User's Guide

2007-12-22T15:15:26Z

Brian: /* Push Arm Placement */

Designer User's Guide

2007-12-22T15:15:08Z

Brian: /* Gate Placement */

Designer User's Guide

2007-12-22T15:14:58Z

Brian: /* Push Arm Placement */

Designer User's Guide

2007-12-22T15:14:33Z

Brian: /* Gate Placement */

Designer User's Guide

2007-12-22T15:12:19Z

Brian: /* Push Arm Placement */

Designer User's Guide

2007-12-21T15:18:18Z

Brian: /* Rotating 90% */

Designer User's Guide

2007-12-21T15:17:48Z

Brian: /* Open Layout */

Designer User's Guide

2007-12-21T15:17:24Z

Brian: /* Open Layout */

Designer User's Guide

2007-12-21T14:04:52Z

Brian:

Designer User's Guide

2007-12-21T14:03:00Z

Brian: /* Box Producer Placement */

File:DesignerConveyorWizard.png

2007-12-21T13:44:12Z

Brian:

Designer User's Guide

2007-12-21T13:43:38Z

Brian: /* Add a Conveyor */

Designer User's Guide

2007-12-21T13:40:29Z

Brian: /* Add a Conveyor */

Designer User's Guide

2007-12-21T13:39:48Z

Brian: /* Add a Conveyor */

Designer User's Guide

2007-12-21T13:38:31Z

Brian: /* Add a Conveyor */

File:DesignerComponentView.png

2007-12-21T13:35:09Z

Brian:

File:DesignerComponentViewExpanded.png

2007-12-21T13:34:43Z

Brian:

Designer User's Guide

2007-12-21T13:30:25Z

Brian: /* Create Layout */

File:DesignerNewLayout.png

2007-12-21T13:28:27Z

Brian:

File:DesignerNewLayoutWizard.png

2007-12-21T13:26:08Z

Brian: uploaded a new version of "Image:DesignerNewLayoutWizard.png"

Designer User's Guide

2007-12-21T13:21:57Z

Brian: /* Create Layout */

File:DesignerNewLayoutWizard.png

2007-12-21T13:21:07Z

Brian:

Designer User's Guide

2007-12-21T13:11:00Z

Brian:

File:DesignerHome.png

2007-12-21T13:07:56Z

Brian:

Designer User's Guide

2007-12-21T01:51:48Z

Brian:

Designer User's Guide

2007-12-21T01:50:24Z

Brian:

Designer User's Guide

2007-12-21T01:49:48Z

Brian: /* Add a Push Arm */

Designer User's Guide

2007-12-21T01:49:14Z

Brian: /* Add a Box Producer */

Designer User's Guide

2007-12-21T01:46:12Z

Brian: /* Add a Push Arm */