Introduction

The Web Administration Dashboard enables users to manage, monitor and configure Rifidi Servers and Applications.

Provide web admin Dashboard example URL:

Server Management

Add Server

1. Right click on 'Servers' node and then choose 'Add server'
   
2. Provide the values for attributes: Display name, IP address, protocol and port where rest services are deployed on that server.
   
3. Click on 'Create' button and confirm
   

Delete Server

1. Right click on server node to delete and then choose 'Delete server'
   
2. Confirm delete operation
   

Update Server Connection Properties

1. Click on server node to modify and then go to properties editor area
   
2. Provide the values for attributes: Display name, IP address, protocol and port where rest services are deployed on that server.
   
3. Click on 'Save' button and confirm
   

Save Server Configuration

1. Right click on server node and then choose 'Save server config'
   
2. Confirm the save operation
   

Save all servers Configuration

1. Right click on "Servers" node and then choose 'Save all servers config'
   
2. Confirm the save operation
   

Get/Set Server JVM Configuration

Configure Primary/Secondary Nodes

Start Server

Stop Server

Configure logging

View/Filter logs

Monitor Server via Jolokia

leveraging edge monitoring Jolokia rest interface

Sensor Management

Sensor

Add Sensor Wizard

Steps user through creating sensor, session and command (where applicable).

1. Right click on 'Sensor Management' node and then choose 'Add Sensor'
   
2. Choose the sensor type and optionally provide the reader id and click Next
   
3. Set the connection properties for sensor and optionally check if automatically start session, and click Next
   
4. Create the command for sensor, choose the command type and choose to create a new command instance or select an existing one, set the properties for command instance and set the scheduling options for executing command, and click Next
   
5. Review steps summary and confirm
   

Updated Sensor Properties

1. Click on sensor node to modify and then go to properties editor area
   
2. Provide the values for sensor attributes
   
3. Click on 'Save sensor properties' button and confirm
   

Delete Sensor

1. Right click on sensor node to delete and then choose 'Delete Sensor'
   
2. Confirm delete operation
   

Session

Start Session

1. Click on session node to start and then click on 'Start Session'
   

Stop Session

1. Click on session node to stop and then click on 'Stop Session'
   

Commands

Updated Command properties

1. Click on command instance node to modify and then go to properties editor area
   
2. Provide the values for command attributes
   
3. Click on 'Save' button and confirm
   

Deleted Command

CReate Command

Execute Command

LLRP

Add Reader Configuarions

Update Reader Configurations

Delete Reader Configuratins

Add RoSpec

Update RoSpec

Delete RoSpec

Diagnostic

View Current Tags on a Sensor

Management

Map on Floor Plan (Overlay Google Maps

Application Management

Rifidi Applications

Add Application

Update Application

Remove Application

Readzones

Get Readzones

Add Readzone

Delete Readzones

Update Readzones

Appliaction Porperties

Get Group Porperties

Add Group Properties

Delete Group Properties

Update Group Properties

Get Application Porperties

Add Application Properties

Delete Application Properties

Update Application Properties